RedHat EL5 安装Oracle 10g RAC之--CRS 安装
时间:2022-03-10 17:06
then
LD_ASSUME_KERNEL=2.4.19
export LD_ASSUME_KERNEL
fi
unset LD_ASSUME_KERNEL (添加此行信息)
#End workaround
[root@node2 bin]# vi srvctl
LD_ASSUME_KERNEL=2.4.19
export LD_ASSUME_KERNEL
unset LD_ASSUME_KERNEL(添加此行信息)
在node 2重新执行root.sh:
注意:root.sh只能执行一次,如果再次执行,需执行rootdelete.sh
[root@node2 bin]# /u01/crs_1/root.sh
WARNING: directory ‘/u01‘ is not owned by root
Checking to see if Oracle CRS stack is already configured
Oracle CRS stack is already configured and will be running under init(1M)
[root@node2 bin]# cd ../install
[root@node2 install]# ls
cluster.ini install.incl rootaddnode.sbs rootdelete.sh templocal
cmdllroot.sh make.log rootconfig rootinstall
envVars.properties paramfile.crs rootdeinstall.sh rootlocaladd
install.excl preupdate.sh rootdeletenode.sh rootupgrade
[root@node2 install]# ./rootdelete.sh
CRS-0210: Could not find resource ‘ora.node2.LISTENER_NODE2.lsnr‘.
CRS-0210: Could not find resource ‘ora.node2.ons‘.
CRS-0210: Could not find resource ‘ora.node2.vip‘.
CRS-0210: Could not find resource ‘ora.node2.gsd‘.
Shutting down Oracle Cluster Ready Services (CRS):
Stopping resources.
Successfully stopped CRS resources
Stopping CSSD.
Shutting down CSS daemon.
Shutdown request successfully issued.
Shutdown has begun. The daemons should exit soon.
Checking to see if Oracle CRS stack is down...
Oracle CRS stack is not running.
Oracle CRS stack is down now.
Removing script for Oracle Cluster Ready services
Updating ocr file for downgrade
Cleaning up SCR settings in ‘/etc/oracle/scls_scr‘
[root@node2 install]#
node 2 再次出错:
[root@node2 install]# /u01/crs_1/root.sh
WARNING: directory ‘/u01‘ is not owned by root
Checking to see if Oracle CRS stack is already configured
Setting the permissions on OCR backup directory
Setting up NS directories
Oracle Cluster Registry configuration upgraded successfully
WARNING: directory ‘/u01‘ is not owned by root
clscfg: EXISTING configuration version 3 detected.
clscfg: version 3 is 10G Release 2.
assigning default hostname node1 for node 1.
assigning default hostname node2 for node 2.
Successfully accumulated necessary OCR keys.
Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
node <nodenumber>: <nodename> <private interconnect name> <hostname>
node 1: node1 node1-priv node1
node 2: node2 node2-priv node2
clscfg: Arguments check out successfully.
NO KEYS WERE WRITTEN. Supply -force parameter to override.
-force is destructive and will destroy any previous cluster
configuration.
Oracle Cluster Registry for cluster has already been initialized
Startup will be queued to init within 90 seconds.
Adding daemons to inittab
Expecting the CRS daemons to be up within 600 seconds.
CSS is active on these nodes.
node1
node2
CSS is active on all nodes.
Waiting for the Oracle CRSD and EVMD to start
Oracle CRS stack installed and running under init(1M)
Running vipca(silent) for configuring nodeapps
Error 0(Native: listNetInterfaces:[3])
[Error 0(Native: listNetInterfaces:[3])]
解决方法:(配置网络)
[root@node2 bin]# ./oifcfg iflist
eth0 192.168.8.0
eth1 10.10.10.0
[root@node2 bin]# ./oifcfg getif
[root@node2 bin]# ./oifcfg setif -global eth0/192.168.8.0:public
[root@node2 bin]# ./oifcfg setif -global eth1/10.10.10.0:cluster_interconnect
[root@node2 bin]# ./oifcfg getif
eth0 192.168.8.0 global public
eth1 10.10.10.0 global cluster_interconnect
并在node2上执行VIPCA:
以root身份执行vipca(在/u01/crs_1/bin)
配置信息应和/etc/hosts文件一致
开始配置
vipca配置成功后,crs服务正常工作
安装完成!
验证CRS:
[root@node2 bin]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.node1.gsd application ONLINE ONLINE node1
ora.node1.ons application ONLINE ONLINE node1
ora.node1.vip application ONLINE ONLINE node1
ora.node2.gsd application ONLINE ONLINE node2
ora.node2.ons application ONLINE ONLINE node2
ora.node2.vip application ONLINE ONLINE node2
[root@node1 ~]# crs_stat -t
Name Type Target State Host
------------------------------------------------------------
ora.node1.gsd application ONLINE ONLINE node1
ora.node1.ons application ONLINE ONLINE node1
ora.node1.vip application ONLINE ONLINE node1
ora.node2.gsd application ONLINE ONLINE node2
ora.node2.ons application ONLINE ONLINE node2
ora.node2.vip application ONLINE ONLINE node2
附:错误案例
如果在运行root.sh时出现以下错误:
在出现错误的节点上运行(root)vipca 解决!
@至此CRS安装成功!
本文出自 “” 博客,请务必保留此出处
RedHat EL5 安装Oracle 10g RAC之--CRS 安装,布布扣,bubuko.com