如何进行route-map解析
时间:2023-05-24 11:30
1、route-map解析 2、实验拓扑 3、实验配置 R1配置 interface Serial0/0 ip address 12.1.1.1 255.255.255.0 interface Serial0/1 ip address 13.1.1.1 255.255.255.0 interface Serial0/2 ip address 14.1.1.1 255.255.255.0 router eigrp 90 redistribute ospf 110 metric 1500 100 255 1 1500 network 14.1.1.0 0.0.0.255 no auto-summary router ospf 110 router-id 1.1.1.1 log-adjacency-changes redistribute rip subnets network 13.1.1.0 0.0.0.255 area 0 router rip version 2 network 12.0.0.0 no auto-summary R2配置 interface Loopback0 ip address 2.2.2.2 255.255.255.0 interface Loopback22 ip address 22.22.22.22 255.255.255.0 interface Loopback222 ip address 222.222.222.222 255.255.255.0 interface Serial0/0 ip address 12.1.1.2 255.255.255.0 router rip version 2 network 2.0.0.0 network 22.0.0.0 network 222.222.222.0 network 12.0.0.0 no auto-summary R3配置 interface Loopback0 ip address 3.3.3.3 255.255.255.0 interface Serial0/0 ip address 13.1.1.3 255.255.255.0 router ospf 110 router-id 3.3.3.3 log-adjacency-changes network 3.3.3.0 0.0.0.255 area 0 network 13.1.1.0 0.0.0.255 area 0 R4配置 interface Loopback0 ip address 4.4.4.4 255.255.255.0 interface Serial0/0 ip address 14.1.1.4 255.255.255.0 router eigrp 90 network 4.4.4.0 0.0.0.255 network 14.1.1.0 0.0.0.255 no auto-summary 此时R3学到4外部路由,我们希望作如下修改。 222.222.222.0/24 修改为E1 2.2.2.0/24 修改Default Seed Metrics为10 22.22.22.0/24 deny掉,permit any R1配置 ip prefix-list 222 seq 5 permit 222.222.222.0/24 access-list 2 permit 2.2.2.0 0.0.0.255 access-list 22 permit 22.22.22.0 0.0.0.255 route-map RM permit 10 match ip address prefix-list 222 set metric-type type-1 route-map RM permit 20 match ip address 2 set metric 10 route-map RM deny 30 match ip address 22 route-map RM permit 40 router ospf 110 redistribute rip subnets route-map RM 可以看到结果与我们的需求一致。 以上就是如何进行route-map解析的详细内容,更多请关注Gxl网其它相关文章!